Spray Foam Insulation
Spray Foam insulation has quickly become the answer to insulating difficult spaces that traditional methods often fail to address. These can include areas where access is limited such as joist end or the rim-joist; smaller surface areas; areas where multiple tie-ins are required such as frost walls. Attic vapor barrier issues are increasingly leading the renovation and new construction market to consider 2 pound closed cell insulation. A 2″ minimum layer of 2 pound spray foam on the attic floor can seal all penetrations and provide a superior vapor barrier to traditional poly.
There are two categories of Spray Foam insulation, each with their own benefits. Open Cell, or half-pound foam, is easier sprayed into tight spaces due to its expansion characteristics, has superior sound proofing attributes and is cost effective. Close Cell, or two-pound foam, has a higher R-value per depth inch and can provide a vapor barrier with a minimum 2” depth application.
Spray Foam inspection To-Do List:
In order to effectively inspect your project you must have the following completed before our initial site visit:
- Full access to area that requires spray foam insulation. All cladding must be removed so the entire surface area is visible.
- A common request is for IDEAL to open up walls or remove cladding. As much as we would like to help our crews are professional insulators and do not possess the resources & tools necessary to perform these services. If you require general contracting services we suggest consulting the BBB list of accredited Home Renovation companies. CLICK HERE
- Any and all moisture issues must be addressed on site prior to considering spray foam insulation. Foam insulation is not a solution to seal over water damaged areas, especially if the source has not been resolved. If spray foam is installed on a wet surface it will be prone to de-laminate.
Spray Foam installation To-Do List:
- Your premises must be vacated for 24 hours after spray foam insulation is applied to ensure proper off-gassing. The details are contained in the attached waiver which is required for all lived-in premises. Please consider this health & safety protocol when considering the viability of your project.
- The area that is to receive the foam must be completely clear of all loose particles. The foam agent is sprayed at a very high rate of speed. Any dust or debris must be clear of the vicinity to ensure the safety and quality of the installation process.
- All spray foam insulation must be covered by an approved thermal barrier such as drywall or an approved thermal fiber such as Hibar.
Spray Foam Insulation Safety:
Spray foam insulation has been in the news lately and questions have been raised to its safety. IDEAL is committed to providing quality products that are safe for our workers to install and free of any dangers to our Customers and end-users.